A wall-mounted TV looks great—until you see the cords. Power cables, HDMI lines, and device wires can make an otherwise clean setup feel cluttered fast.
Below are 7 practical, clean ways to hide TV wires, with clear notes on what’s DIY-friendly and when it’s smarter to call a pro.
Before you start: 3 quick planning tips
Decide where your devices will live: on a console below, in a cabinet, behind the TV, or in a nearby closet.
Map the cable path: the cleanest setups usually run straight down behind the TV to a media unit.
Think safety first: some “quick fixes” can create hazards or violate electrical rules—especially when running power cables inside a wall.
Option 1: Cable raceway (surface-mounted cord cover)
A paintable plastic channel that sticks to the wall and hides cords neatly.
Best for: fast, affordable cleanups in living rooms, bedrooms, rentals
DIY or Pro? DIY
Pros: inexpensive, easy to install, removable, paintable
Cons: still visible up close (but much cleaner than loose cords)
Option 2: Route cables behind a media console (simple cable management)
Sometimes the easiest solution is the best: mount the TV, then hide cords behind a console using clips, sleeves, and a power bar.
Best for: homeowners who don’t want to cut drywall
DIY or Pro? DIY
Pros: no wall cutting, easy access to devices
Cons: you may still see a small section of cord drop depending on layout
Option 3: Fabric cord sleeve (bundle and blend)
A flexible sleeve wraps multiple cords into one clean bundle.
Best for: setups with multiple devices (soundbar, console, streaming box)
DIY or Pro? DIY
Pros: quick, tidy, inexpensive
Cons: cords are still visible, just organized
Option 4: Floating shelf under the TV (shorten the “cord drop”)
Install a slim floating shelf under the TV for devices. This reduces how far cords need to travel.
Best for: minimalist setups, small spaces
DIY or Pro? DIY or Pro (depending on wall type)
Pros: looks intentional, keeps devices accessible
Cons: still requires some cable management to look truly clean
Option 5: In-wall low-voltage cable pass-through kit (HDMI, Ethernet, etc.)
This is a common “hidden wires” method: you install a pass-through behind the TV and another behind the console, then run low-voltage cables inside the wall.
Best for: the cleanest look without a full remodel
DIY or Pro? DIY for confident homeowners; Pro recommended
Pros: very clean finish, great for HDMI and AV cables
Cons: requires cutting drywall and careful planning
Important: This is typically for low-voltage cables (like HDMI). Power cables are a different story.
Option 6: Add a recessed media box (hide the plug and bulky adapters)
A recessed box sits behind the TV so the plug, power adapter, and cable connections don’t push the TV away from the wall.
Best for: ultra-slim mounts, tight-to-wall installs
DIY or Pro? Pro recommended
Pros: cleanest behind-TV look, helps the TV sit flush
Cons: more involved install; placement matters
Option 7: Install a proper in-wall power solution (the “pro-level” finish)
If you want zero visible wires, you’ll usually need a safe way to get power behind the TV—done correctly for your home.
Best for: feature walls, fireplace TVs, high-end living room upgrades
DIY or Pro? Pro
Pros: cleanest possible result, best for resale and long-term use
Cons: more cost than surface solutions; requires proper installation
DIY vs Pro: which option is right for you?
Choose DIY if:
You’re okay with a small visible cover (raceway) or a tidy cord bundle
You don’t want to cut drywall
You want a quick, budget-friendly improvement
Choose Pro if:
You want a true “no wires showing” finish
Your TV is large/heavy or mounted above a fireplace
You’re building a feature wall (slats, paneling, stone) and want everything planned cleanly
You want the TV to sit flush with no bulky plugs behind it
Common mistakes to avoid
Running the TV’s power cord inside the wall (often unsafe and not recommended)
Mounting the TV first, then realizing the outlet is in the wrong spot
Forgetting about soundbar and device wiring
No plan for where devices will go (everything ends up dangling)
Want a clean, professional TV setup in York & Simcoe Region?
At The Handyman Services, we help homeowners across York Region and Simcoe Region get a clean, finished look—TV mounting, cable management, and feature wall builds—with clear communication and transparent pricing.
If you want help choosing the best wire-hiding option for your space, reach out for a free consultation and we’ll walk you through the best setup for your room and budget.